BiMAX5 Solar Panel
BiMAX5 assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading. Low PID, the general panel is 0.7%, but BiMAX5 lower than 0.45%.
Clear Backsheet Technology
The clear backsheet solar panel has good anti-hail performance, and the front side uses 3.2 mm tempered glass, which has strong pressure-bearing capacity and impact resistance. For hail-affected areas, the use of transparent backsheet solar panel can reduce damage risk.
Half Cell Solar Panel
Output power of half-cell panel with same efficiency is higher than full cell. Half-cell can reduce the power loss caused by shading, and increase power generation of module in the morning and evening and when the lower edge of the module accumulates dust and snow, and improves economic benefits of power station. Compared with other new technologies, half-cut technology is the most mature and the easiest to achieve rapid mass production. At the same time, the additional cost is not much.
BiMAX5 Solar Panel Certifications:
IEC 61215, IEC 61730, UL 61730
ISO 9001:2008: ISO Quality Management System
ISO 14001: 2004: ISO Environment Management System
OHSAS 18001: 2007 Occupational Health and Safety
BiMAX5 Solar Panel Features:
- Bifacial technology enables additional energy harvesting from rear side (up to 25%)
- Glass/glass lamination ensures 30 year product lifetime, with annual power degradation < 0.45%,
- 1500V compatible to reduce BOS cost
- Solid PID resistance ensured by solar cell process optimization and careful module BOM selection Reduced resistive loss with lower operating current
- Higher energy yield with lower operating temperature
- Reduced hot spot risk with optimized electrical design and lower operating current
