Sunpal BiMAX6 Solar Panel
Sunpal 210mm Doulbe Glass PV module, The average life is up to 30 years, longer than the 25 years for typical components.Life cycle power generation is about 21% higher than that of general components.Power generation fading rate of about 0.5%, higher than the general component.Almost impervious to water, corrosion resistance, poor weather resistance and fire resistance, can be used as high humidity zone, agriculture/fishing light complementary projects, acid rain areas, high salt fog areas, etc. Glass strength is low, can reduce snail grain cracking problem.Aluminum - free frame design can reduce PID attenuation rate.
Half-cut Solar Cell
The multi-main gate has more current collection paths, which makes the component's anti-crack ability significantly enhanced. In addition, on the optical side, the multi-main gate technology uses circular solder tape, which achieves optical utilization of about 75% at all angles of the solder tape shielding area, enabling the 210 components to achieve higher power while achieving higher actual power generation capacity per watt.
BiMAX6 solar panel meet certifications:
IEC 61215, IEC 61730, UL 61730
ISO 9001:2008: ISO Quality Management System
ISO 14001: 2004: ISO Environment Management System
OHSAS 18001: 2007 Occupational Health and Safety
BiMAX6 solar panel featureas:
- Positive power tolerance (0~+5W) guaranteed High module conversion efficiency (up to 21%)
- Slower power degradation enabled by Low LID Mono PERC technology: first year <2%, 0.55% year 2-25
- Solid PID resistance ensured by solar cell process optimization and careful module BOM selection
- Reduced resistive loss with lower operating current
- Higher energy yield with lower operating temperature
- Reduced hot spot risk with optimized electrical design and lower operating current
